Low-voltage kit.installation Vibrator GRSCH, RSCH, SCHU, AVR, PP, etc.

Main switchboards (GRSH)

The main switchboards are designed to receive electricity with a voltage of up to 1 kV with a frequency of 50 Hz, distribute electricity to consumer feeders and protect against short circuit and overload currents.

Control cabinet (Control panel, control panel)

The control panel (control cabinet) provides control over the distribution of power, as well as power management of technological equipment. Control panels are designed to control the operation of electric motors, pumps, fans, dampers and other electrical equipment. The control panel is operated in local, automatic and remote modes.

Group power switchboards (RSCH)

Group switchboards are designed for the distribution of electricity in single-phase and three-phase alternating current networks with a voltage of up to 380 V; in DC networks; protection of lines in case of overloads, leaks and short circuits.

Automatic reserve activation shields (AVR)

Panels of the AVR type are designed for guaranteed power supply to consumers of single-phase and three-phase voltage of 220 V, 380 V and ensure the inclusion of emergency power when the voltage drops on the buses of the main power source.

Instrument inspection panels (SCP)

The instrument inspection board (PP) is designed to check the operability of electrical appliances having:

• three-phase voltage 380 V AC with a frequency of 50 Hz;
• single-phase and three-phase voltage 220 V AC with a frequency of 50 Hz;
• single-phase voltage 110 V AC with a frequency of 50 Hz;
• constant voltage 24 V.

Remote switch-off shields

Remote shutdown shields (DO) are designed for remote shutdown of various units (fuel mechanisms, ventilation dampers, separators, etc.).

Scope of application: energy and nuclear power facilities, facilities of various industries, civil engineering facilities (airports, ports, business centers, residential buildings, etc.), Marine and River Register facilities.

Control and registration cabinets (SKR)

The parameter control and registration cabinet (SKR) is designed for use in various systems where it is necessary to measure, control and visualize the parameters of technological electrical processes.

The main purpose of the control cabinets is the management and control of various kinds of actuators (dampers, pumping units, electric motors, etc.). SCR can be used both independently and as part of automated process control systems at energy facilities, including nuclear power facilities, industrial facilities, water, oil and gas pumping stations, on ships, as well as at civil engineering facilities.

Soft start devices TPU-25R

The TPU-25R soft start device is designed for starting three-phase asynchronous short-circuited motors, the rated current of which is in the range from 5 to 25 A, with a set value of the starting current. The device operates in three-phase alternating current networks with a voltage of 380V and a frequency of 50 Hz.

The soft start device TPU-25R provides a smooth setting of the rated current (IN) of the starting motors in the range from 5 to 25 A and a smooth setting of the multiplicity of the starting current (KP) in the range from 2 to 5 IN. Within the specified parameters, the UMP provides the start of asynchronous motors in the power range from 2.6 to 13 kW (at cos = 0.8).

• Low-voltage complete NCU devices. Description.

Questionnaire